Gavita Master Controllers EL1 & EL2 - Gen 2
Couldn't load pickup availability
Overview
Control up to 80 x Gavita e-series lights with an EL Gavita Master Controller - Gen 2.
No timers, contactors & switchboards are needed! You can control all ballasts at once with a couple clicks.
EL1: 40 lights, 1 room, 1 temp sensor
EL2: 80 lights, 2 rooms, 2 temp sensors, 2 ECMs (connects to heaters, CO2 equipment, etc)
If you opt for EL2, you can run both rooms on the same, separate or overlapping light cycles.
- Up to 80 x Gavita lights
- Dims & Boosts in 10W increments (from 50% - 115%)
- Connects with 2 other devices (e.g. humidifier) - EL2 Only
Sunrise & Sunset Mode
Switch to Sunrise & Sunset mode to slowly dim and boost over 30 minutes!
Dim & Boost Lights In 10W Incremements
You can adjust the light output of all connected lights in 10W increments (from 50% to 115%)
No Overheating
If your grow room gets too hot, auto dim and eventually emergency shut down will kick in.
You get a warning before, and a notification after this happens.
No High Inrushes
All ballasts stay in standby mode until they get a signal from the controller to switch on.
Event Logging
You check temperature highs and lows, last autodims, last autoshutdown and more.
Choose Your Display
Output: % or watts - Temperature: Celsius or Fahrenheit - Time: 24hr or AM/PM
External Contactor Modules (EL2 Only)
You can connect 2 extra bits of kit to your controller then choose whether they switch on or off.
Easy To Use
Everything's plug & play.
The Tech | ||
---|---|---|
EL1 | EL2 | |
Max no of Lights | 40 | 80 |
Lighting Control | 50 - 115% | 50 - 115% |
Number of Rooms | 1 | 2 |
External Contactor Modules (ECMs) | 2 optional (connects CO2 equipment, heaters, etc) | |
Alarm contacts | 2, nc/no | |
Temperature sensors | 1 |
2 (1 per room) |
Extras (must be bought separately) | |
---|---|
ECM1 | External contactor modules |
B200 Boosters | Maximum of 3 per port |
Questions & Answers
Have a Question?
Be the first to ask a question about this.